In past years, we've a style of candle holder made of wood it holds lovely tapers and makes a striking centerpiece. Nothing compares to the warm, focusing glow of candlelight. One of my more recently mobile children has not figured out candle etiquette, and altho' we didn't have difficulties with our older children around matches and fire, this little one makes having flame about a problem. We all seven of us live in a very small house (less than 1000sqft of living space), so space is at a premium, especially on the only table.
A friend came up with the thought of having a Phillipian Star that hung on the wall. What a great idea! But how? and wouldn't the flames of the candles on the bottom melt the candles above extra quickly? And how, and of what materials, could you make a wall scone in that shape that wasn't a fire hazard? More importantly, how could I do it with the skills I already have and on a budget?
I mulled it over for a while, and then it came to me: fake candles! Those battery operated candles, some needle and thread, some glue and materials and *voila* easy-peasy. As I went I modified it to be even easier! and I didn't need to whip out a lot of tools, and it took only 20 minutes to make. Even better: I got everything at the dollar store. Yup, you read that right -- super effective & cheap project.
tools needed: round place-mat, ribbons, hand sewing needle and thread, scissors, glue, battery t | ealight candles |
1) The ribbon was glued onto the round place-mat with fabric glue. It took a little math to get the geometry and placement right, and you do need to allow time for the glue to dry. We did some book reading & kitchen cleaning while it dried.
2) I measured ribbon to go around the side of the tealights to make a loop, careful to singe/melt the edges on a real candle (best anti-fray ever). At first I glued the loops together, but it took too much time, Simple tacking them with a needle & thread by hand was much faster.
the loops of ribbon around the tealights are tacked on only at the top so that it can be lifted to turn the candle on & off |
3) Sew on the loops in place at the points of the star by just a few stitches only at the top so that the loops hang down. The faux candles are light-weight and not creating a lot of tension/pull so it doesn't take much. This way, too, it's easy to slide them into the loops (or replace them later as need be), and easy to get to the little stitches to turn them on or off.
4) I used a staple gun to attach it right to the wall. I also added a bit of left over gold glitter paint to the ribbon lines that make the star and to the center candle. Done! and out of the reach of little hands, no fire-hazard, and still visually striking.
the finished product! |
We use ours with six red candles around the edged and a golden one in the middle. The tealights themselves are white, so I made the colors by the ribbons, You could also paint the tops of the tealights if you want -- they take paint remarkably well. I found some tealights that had red glitter on them like little peppermint candies, so I got some of those for the red candle spots after Thanksgiving for the weeks of December -- because glitter makes everything better *wink*.
No comments:
Post a Comment